how to hotwire a Jeep? Yes, you can hotwire a Jeep Wrangler, but It’s not easy to Hot-wiring your Jeep Wrangler. Hot-wiring a Jeep Wrangler is dangerous and likely to damage your jeep. Not try this to hot-wire anyone’s Jeep or car but yours, and be prepared to show the proof of ownership. It’s a warning for you, to Hot-wire a Jeep Wrangler is dangerous.
In this article, we discussed different steps to hot-wire a Jeep Wrangler but remembered that we already mentioned above that it’s dangerous and not secure to hot-wire a Jeep Wrangler for your Jeep.
how to hotwire a Jeep?
Here are the different steps to how to hotwire a Jeep Wrangler.
-
Try a Screwdriver.
-
Remove the Ignition Cover.
-
Find the battery and Starter wire.
-
Connect the Power wires.
-
Connect the starter wires.
-
Deal with the additional security.
-
Turn the Jeep Off.
- Try A Screwdriver.
Pick a flat-head screwdriver and pound it into the ignition and turn it to like your Jeep Wrangler key. Through this, the ignition cylinder will ruin, but it can work on it.
- Remove the ignition cover.
If the jeep does not start, now pull the screwdriver from the ignition and remove the screws from the panels on the top and bottom of the steering column. Now, by using the flat-head screwdriver to remove the plastic panels and the wires and the ignition cylinder, to expose them. Try this carefully to avoid damage to the steering column.
- Find the battery and starter wire.
Find out the battery and the starter wire. Generally, there are two RED wires to handle the Jeep’s power, and there are one or two BROWN wires that connect to the starter. Read your Jeep Wrangler manual to learn it’s specific wire color code .
- Connect the power wire.
Use the wire cutters to cut the power wires from the cylinder, and don’t forget to wear the gloves. Then, separate the wire ends and by twisting connect them together to provide power to the lights, radio, and other electrical systems.
- Connect the starter wires.
Separate the starter wires and cut the starter wires from the cylinder. Be careful not to touch them, the exposed ends, as they carry a powerful current and will shock you. Now, touch them together in these wires, but till the Jeep has started, separate them and tape the ends to avoid getting shocked during the driving.
Tips:
If your Jeep Wrangler has only one starter wire, then touch it to the exposed part of the connected power wires to start the Jeep Wrangler.
- Deal with additional security.
Deal with the additional security. In some jeeps, the steering wheel lock’s bolt can be opened by jamming a screwdriver in between the top of the steering wheel and the steering column.
- Turn the Jeep Off.
Turn the jeep off by separating the power wires from each other. Now, find out your Jeep Wrangler extra set of keys and move to the repair shop, immediately.
Conclusion:
When you lose your jeep wrangler key, then there are the few methods that can be used to start the Jeep’s. One of the methods is that the employee used the screwdriver pound into the ignition slot with the help of a hammer or the drill.
The other method is Hot-wiring, where the wires of the battery and the ignition are twisted together to start the Jeep Wrangler. This method is also called the RED coil wire method, where the wire of the battery is connected with the ignition coil and solenoid to start the Jeep’s engine.
