Every Jeep Wrangler owner knows that The owner’s having a Jeep Wrangler means that you have the Reliability, performance, and features. But what if the Jeep Wrangler USB Port Center is not working properly in your Jeep Wrangler? If you are facing an issue related to your Jeep Wrangler USB Port, then it’s time to find out and try to solve the problem.
The USB port is in the console media hub in your Jeep Wrangler, and the second USB port is near the centre armrest.
The main issues in USB port is as followings:
- Dust or dirty port,
- A broken fuse,
- Software problems,
- Compatibility,
- Connectivity issues,
The above-mentioned issues are main issues with Your Jeep Wrangler USB Port.
You have a problem with your Jeep Wrangler USB Port Center Console?
In this article, I will define common issues with Your USB port center console and try to fix them.
How can you charge your phone in a Jeep Wrangler?
If you want to charge your phone in a Jeep Wrangler, you can charge using the USB port.
First, connect your Charging Cable of your phone with the USB center console.
Then, connect your phone with this connected charging Cable and wait a few seconds and then your phone starts charging. Also, when your phone device is synchronized with your Jeep Wrangler, you can also control the radio and perform media tasks.
Where is the USB port in a Jeep Wrangler?
All the Jeep Wrangler models have a few USB ports, also you will use the Dual USB ports near the console Media hub, and the second USB port is near the center armrest.
Also, in the rear seat access, you can find the additional USB port centre console.
How Can you fix the USB port centre console?
In this article, the above-mentioned few possible problems you can face with your Jeep Wrangler USB Port Center Console and trying to fix these issues.
USB port problems In Jeep Wrangler.
There are various reasons that can create problems with the USB port in the Jeep Wrangler. Some of these problems are discussed in this article followings:
-
Dirty USB port:
In the Jeep Wrangler USB Port Center, the dust, dirt, and other small debris can enter the port, and that can damage the connection between the Jeep’s and the connected device.
This damage can be the source of Error messages and generate other issues in the USB port in your Jeep Wrangler and stop functioning properly.
-
Blown Out Fuse of the USB port:
In all the Jeep’s models (Jeep Wrangler), there is a small fuse that is connected with the USB ports. This small fuse, helpful and provides protection to the port and attached device when there are any problems.
The small fuse can be diffused due to various reasons in your Jeep, Which are:
- Broken wires,
- Harsh weather disrupting to the system,
- Short circuit,
- Improper usage of Fuse,
- Poor installation,
These are some cases when your Jeep Wrangler USB port small fuse is blown out and not working properly.
3) Software problems:
The most common issue in the USB port is the Software errors. These software problems may prevent the USB port from working properly.
This can happen due to when we cannot update the software of the USB port or our Jeep Wrangler is using the outdated firmware. If you want to resolve this, you need to update software or firmware.
4) Faulty USB port:
After replacing the USB cable or cleaning the dust, even after replacing and cleaning, the USB port is showing the Problems.
5) USB port Connectivity Issue:
The connectivity Issue with the USB port in your Jeep Wrangler can create problems in the USB port, because it works differently in Apple and Android. For example, the Apple Car Play is connected with a port through a wireless motion.
When external devices like Flash drives are used the problem can be even worse. You may find that the files in the flash drive don’t play anything or the USB port doesn’t accept the device.
- Update issues with the USB Port:
Many riders try to connect their USB port with your android or iPhone in Jeep Wrangler. But in some cases, these connected devices show an update issue, through this the USB port is not connected, creating an issue for the users.
When you are facing the same issue with your USB port, you need to update the latest android or iPhone to connect with the USB port in your Jeep Wrangler.
How to clean the USB port in a Jeep Wrangler?
Cleaning a dirty USB port in your Jeep Wrangler means that it will clear the issues in your Jeep Wrangler USB Port Center Console that will occur in connecting your device with the USB port. To clean a USB port you have different techniques.
The different methods to clean the USB port are as follows.
- Blow Compressed Air:
The air compressor is used to remove loose dirt and Debris from your Jeep Wrangler USB Port. The electronic duster is also air compressed for this method. The air compressor method can clean the USB port in your Jeep’s.
- Clean with Alcohol:
To clean the dirt and debris from your Jeep Wrangler USB Port Center Console take a few cotton and swabs dipped in alcohol. Through this you can wipe inside the USB port to clean it up.
How to Fix Jeep Wrangler USB Port Problems?
The USB port center console of Jeep Wrangler design is outdated or damaged due to dirty, blow out fuse and software problems. This can cause problems because the power will not be on the console USB port.
However, a clear solution of this issue involves refinishing the console, which says that choose the console in your direction, and no dirt in the space, and it looks neat and clean.
How to Replace A New USB port in a Jeep Wrangler?
During The replacement of the USB port centre console you’ll need to have.
- Screwdriver,
- Panel remover,
- Socket and ratchet set,
- A USB port,
To replace a USB port in your Jeep Wrangler follow these steps and install a new USB port in your Jeep Wrangler.
Step-1: Remove the Center Console:
Move the front seats forward and start removing the USB center console. Then, move the rear seats backward and look for a plastic cover.
Now, use the screwdriver or panel remover and take out the small opening on the plastic cover.
Now, you need to unscrew a large bolt by using the right socket. Remove it, and then repeat the same procedure for the other side of the plastic cover.
Next, you need to unscrew the plastic cup holder and then remove them, and again take the screwdriver or panel remover and remove the gear shifter cover. Now, disconnect the shift lever wire.
Next, remove the footwell from the driver side, and pull it out by using your fingers or screwdriver.
After removing the footwell, now you can see tabs that are securing the USB port center console in place. Now, push those tabs and remove the center console with the help of a tool.
Step-2: Remove the bad USB port:
After removing the footwell from the driver side, now go to the passenger side footwell. When you already remove the center console, you should be able to see a clear view of the assembly that is encasing the USB port. Remove the bolts that are located on the both side driver and passenger and remove that assembly.
Now, you need to disconnect and remove the bad USB port from your Jeep Wrangler.
Step-3: Install New USB Port:
Now, it’s time to install a new USB Port into the same location and connect it with the wires.
Now, return the USB port assembly in its place and ensure that the clips are attached. Again screw the bolts to secure this assembly.
Now, return the footwell and attach the shifter wire again. Don’t forget to return to set the front and rear seats in place.
When all the seats are set, now turn on the Your Jeep Wrangler engine and check the new USB port is working properly.
Final Words:
In your Jeep Wrangler, the USB port center console is an excellent addition for your Jeep Wrangler. It’s a great opportunity for listening to music, charging your phone devices, and controlling your center console remotely.
However, when your Jeep USB port is damaged or malfunctions, you can solve the problem by following these necessary steps and using a DIY or experienced mechanic to get the problem fixed.
By providing time to time and proper care, then your Jeep Wrangler USB Port provides reliable performance for a long time.
